Firstly we clean the surface, fill the cracks with Dr.Fixit or Asian Paints Crack filler apply a coat of primer and 2 coats of paint. If we are using top end products i.e. weather coat paints we might have to use base coat instead of normal exterior cement primer as per the guidance.

We use a high-pressure jet washer to clean the surface, as normal pipe water doesn’t help in removing the deep deposits. Followed by manual scrubbing with wire brush to ensure the dirt is removed completely before the crack filling and primer. We get all the extension cable, pressure washers etc. Only water source must be arranged by the customers. We ensure less wastage of the water as an environmental concern.

We are a start-up and customer trust or feedbacks are very important for our growth. We follow the dilution percentage as recommended by the brands on their website or product buckets. We ensure quality job as we are providing service Warranty too for the jobs executed. If any doubts or problem during the execution of the work, clients can contact company or SPOC at any point of time. We would be happy to assist.

We check for any seepages or leakages and check if waterproofing treatment required for the surface. If there are minor air cracks we treat it with Acrylic crack fillers. If there are evidently big cracks and water seepage problem exists we first treat it with Acrylic crack fillers and then apply 3 coats of water proofing membrane we avoid any water logging in in future.

For Mangalores tiles and floor tiles we have a new product from Asian paints known as Asian paints Apex tile guard. It is a water-based product and can we used on tiles which give a new trendy look, there are wide range of colour options, Terracotta being commonly used to retain natural look. For stone cladding we can varnish them with a solvent based Transparent tile-guard after cleaning the surface with chemical water to enhance the look.

Yes, we do RCC terrace waterproofing treatment too. We use the products that have membrane which blocks water particles to seep in the surface for longer period of time. Firstly, we cleaning surface and remove algae/fungus and dust particles from surface with help of pressure washer and Wire brush. Then we apply crack filler or cement-based fillers to fill the gaps and make the surface ready for waterproofing treatment. Then we apply a coat of primer or Prime seal coating and follow with 3 coats of waterproof membrane coating in the recommended pattern. Drying period of 3-4hrs is recommended between each coating. We also offer 2 years warranty for the waterproofing treatment.

Yes, we also deal with Temperature absorbent treatment. It is a 2 days procedure where we apply 3 coats of Preferred with high SRI Index i.e., the products which reflects back the sun rays or Mostly UV radiations from the surface of the rooftop by blocking heat to penetrate through the surface. The application procedure is simple roller based and cost effective too. The products are mostly available in White to light grey shades. It also acts as a partial waterproofing material too.

We cover the floor and compound area with plastic sheets/covers before cleaning or painting the surface. We also move the pots in garden and terrace area before painting to ensure it’s not damaged.

All our painters risks during the work will be borne by Colourdrive. We strictly follow all safety precautions like industry standard safety belts, Polyester Ropes. If the work sites requires scaffolding , either it must be arranged by the customers or will be charged additional as per actuals.